diff --git a/drivers/gpio/axp_gpio.c b/drivers/gpio/axp_gpio.c
index 6e632c8fc73..181c53bfe72 100644
--- a/drivers/gpio/axp_gpio.c
+++ b/drivers/gpio/axp_gpio.c
@@ -15,6 +15,9 @@
 #include <errno.h>
 #include <sunxi_gpio.h>
 
+#define AXP_GPIO_PREFIX			"AXP0-"
+#define AXP_GPIO_COUNT			4
+
 static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val);
 
 static u8 axp_get_gpio_ctrl_reg(unsigned pin)
@@ -46,28 +49,14 @@ static int axp_gpio_direction_input(struct udevice *dev, unsigned pin)
 static int axp_gpio_direction_output(struct udevice *dev, unsigned pin,
 				     int val)
 {
-	__maybe_unused int ret;
 	u8 reg;
 
-	switch (pin) {
-#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
-	/* Only available on later PMICs */
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		ret = pmic_bus_clrbits(AXP_MISC_CTRL,
-				       AXP_MISC_CTRL_N_VBUSEN_FUNC);
-		if (ret)
-			return ret;
-
-		return axp_gpio_set_value(dev, pin, val);
-#endif
-	default:
-		reg = axp_get_gpio_ctrl_reg(pin);
-		if (reg == 0)
-			return -EINVAL;
+	reg = axp_get_gpio_ctrl_reg(pin);
+	if (reg == 0)
+		return -EINVAL;
 
-		return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
-						 AXP_GPIO_CTRL_OUTPUT_LOW);
-	}
+	return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
+					 AXP_GPIO_CTRL_OUTPUT_LOW);
 }
 
 static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
@@ -75,25 +64,16 @@ static int axp_gpio_get_value(struct udevice *dev, unsigned pin)
 	u8 reg, val, mask;
 	int ret;
 
-	switch (pin) {
-#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
-	/* Only available on later PMICs */
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		ret = pmic_bus_read(AXP_VBUS_IPSOUT, &val);
-		mask = AXP_VBUS_IPSOUT_DRIVEBUS;
-		break;
-#endif
-	default:
-		reg = axp_get_gpio_ctrl_reg(pin);
-		if (reg == 0)
-			return -EINVAL;
+	reg = axp_get_gpio_ctrl_reg(pin);
+	if (reg == 0)
+		return -EINVAL;
 
-		ret = pmic_bus_read(AXP_GPIO_STATE, &val);
-		mask = 1 << (pin + AXP_GPIO_STATE_OFFSET);
-	}
+	ret = pmic_bus_read(AXP_GPIO_STATE, &val);
 	if (ret)
 		return ret;
 
+	mask = 1 << (pin + AXP_GPIO_STATE_OFFSET);
+
 	return (val & mask) ? 1 : 0;
 }
 
@@ -101,25 +81,12 @@ static int axp_gpio_set_value(struct udevice *dev, unsigned pin, int val)
 {
 	u8 reg;
 
-	switch (pin) {
-#ifdef AXP_MISC_CTRL_N_VBUSEN_FUNC
-	/* Only available on later PMICs */
-	case SUNXI_GPIO_AXP0_VBUS_ENABLE:
-		if (val)
-			return pmic_bus_setbits(AXP_VBUS_IPSOUT,
-						AXP_VBUS_IPSOUT_DRIVEBUS);
-		else
-			return pmic_bus_clrbits(AXP_VBUS_IPSOUT,
-						AXP_VBUS_IPSOUT_DRIVEBUS);
-#endif
-	default:
-		reg = axp_get_gpio_ctrl_reg(pin);
-		if (reg == 0)
-			return -EINVAL;
+	reg = axp_get_gpio_ctrl_reg(pin);
+	if (reg == 0)
+		return -EINVAL;
 
-		return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
-						 AXP_GPIO_CTRL_OUTPUT_LOW);
-	}
+	return pmic_bus_write(reg, val ? AXP_GPIO_CTRL_OUTPUT_HIGH :
+					 AXP_GPIO_CTRL_OUTPUT_LOW);
 }
 
 static const struct dm_gpio_ops gpio_axp_ops = {
@@ -134,8 +101,8 @@ static int gpio_axp_probe(struct udevice *dev)
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 
 	/* Tell the uclass how many GPIOs we have */
-	uc_priv->bank_name = strdup(SUNXI_GPIO_AXP0_PREFIX);
-	uc_priv->gpio_count = SUNXI_GPIO_AXP0_GPIO_COUNT;
+	uc_priv->bank_name = AXP_GPIO_PREFIX;
+	uc_priv->gpio_count = AXP_GPIO_COUNT;
 
 	return 0;
 }
diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
index 2ca4960f17a..094c45a6927 100644
--- a/drivers/gpio/sunxi_gpio.c
+++ b/drivers/gpio/sunxi_gpio.c
@@ -244,17 +244,7 @@ int sunxi_name_to_gpio(const char *name)
 int sunxi_name_to_gpio(const char *name)
 {
 	unsigned int gpio;
-	int ret;
-#if !defined CONFIG_XPL_BUILD && defined CONFIG_AXP_GPIO
-	char lookup[8];
-
-	if (strcasecmp(name, "AXP0-VBUS-ENABLE") == 0) {
-		sprintf(lookup, SUNXI_GPIO_AXP0_PREFIX "%d",
-			SUNXI_GPIO_AXP0_VBUS_ENABLE);
-		name = lookup;
-	}
-#endif
-	ret = gpio_lookup_name(name, NULL, NULL, &gpio);
+	int ret = gpio_lookup_name(name, NULL, NULL, &gpio);
 
 	return ret ? ret : gpio;
 }
diff --git a/include/axp221.h b/include/axp221.h
index 32b988f3a9c..8a4a3cca82f 100644
--- a/include/axp221.h
+++ b/include/axp221.h
@@ -53,10 +53,6 @@
 #ifdef CONFIG_AXP221_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_ALDO_IN		BIT(0)
-#define AXP_VBUS_IPSOUT			0x30
-#define AXP_VBUS_IPSOUT_DRIVEBUS		(1 << 2)
-#define AXP_MISC_CTRL			0x8f
-#define AXP_MISC_CTRL_N_VBUSEN_FUNC		(1 << 4)
 #define AXP_GPIO0_CTRL			0x90
 #define AXP_GPIO1_CTRL			0x92
 #define AXP_GPIO_CTRL_OUTPUT_LOW		0x00 /* Drive pin low */
diff --git a/include/axp809.h b/include/axp809.h
index 71a7cb2aaa1..3bd71b3d1a3 100644
--- a/include/axp809.h
+++ b/include/axp809.h
@@ -47,10 +47,6 @@
 #ifdef CONFIG_AXP809_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_ALDO_IN		BIT(0)
-#define AXP_VBUS_IPSOUT			0x30
-#define AXP_VBUS_IPSOUT_DRIVEBUS		(1 << 2)
-#define AXP_MISC_CTRL			0x8f
-#define AXP_MISC_CTRL_N_VBUSEN_FUNC		(1 << 4)
 #define AXP_GPIO0_CTRL			0x90
 #define AXP_GPIO1_CTRL			0x92
 #define AXP_GPIO_CTRL_OUTPUT_LOW	0x00 /* Drive pin low */
diff --git a/include/axp818.h b/include/axp818.h
index 08ac35d15fa..b3a9686e0e5 100644
--- a/include/axp818.h
+++ b/include/axp818.h
@@ -61,10 +61,6 @@
 #ifdef CONFIG_AXP818_POWER
 #define AXP_POWER_STATUS		0x00
 #define AXP_POWER_STATUS_ALDO_IN		BIT(0)
-#define AXP_VBUS_IPSOUT			0x30
-#define AXP_VBUS_IPSOUT_DRIVEBUS		(1 << 2)
-#define AXP_MISC_CTRL			0x8f
-#define AXP_MISC_CTRL_N_VBUSEN_FUNC		(1 << 4)
 #define AXP_GPIO0_CTRL			0x90
 #define AXP_GPIO1_CTRL			0x92
 #define AXP_GPIO_CTRL_OUTPUT_LOW	0x00 /* Drive pin low */
diff --git a/include/sunxi_gpio.h b/include/sunxi_gpio.h
index 122987c395e..12b54c8dda4 100644
--- a/include/sunxi_gpio.h
+++ b/include/sunxi_gpio.h
@@ -82,7 +82,6 @@ enum sunxi_gpio_number {
 	SUNXI_GPIO_L_START = 352,
 	SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
 	SUNXI_GPIO_N_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_M),
-	SUNXI_GPIO_AXP0_START = 1024,
 };
 
 /* SUNXI GPIO number definitions */
@@ -99,8 +98,6 @@ enum sunxi_gpio_number {
 #define SUNXI_GPM(_nr)	(SUNXI_GPIO_M_START + (_nr))
 #define SUNXI_GPN(_nr)	(SUNXI_GPIO_N_START + (_nr))
 
-#define SUNXI_GPAXP0(_nr)	(SUNXI_GPIO_AXP0_START + (_nr))
-
 /* GPIO pin function config */
 #define SUNXI_GPIO_INPUT	0
 #define SUNXI_GPIO_OUTPUT	1
@@ -185,11 +182,6 @@ enum sunxi_gpio_number {
 #define SUNXI_GPIO_PULL_UP	1
 #define SUNXI_GPIO_PULL_DOWN	2
 
-/* Virtual AXP0 GPIOs */
-#define SUNXI_GPIO_AXP0_PREFIX "AXP0-"
-#define SUNXI_GPIO_AXP0_VBUS_ENABLE	5
-#define SUNXI_GPIO_AXP0_GPIO_COUNT	6
-
 struct sunxi_gpio_plat {
 	void			*regs;
 	char			bank_name[3];