diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig
index 2741e7ed9079..8bd14ad90f6d 100644
--- a/configs/pinecube_defconfig
+++ b/configs/pinecube_defconfig
@@ -14,8 +14,5 @@ CONFIG_SYS_I2C_SPEED=400000
 CONFIG_MTD=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SUN8I_EMAC=y
-CONFIG_AXP209_POWER=y
-CONFIG_AXP_DCDC2_VOLT=1250
-CONFIG_AXP_DCDC3_VOLT=3300
 CONFIG_CONS_INDEX=3
 CONFIG_SPI=y
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 08369bf833e4..24b36be4c6cf 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -176,10 +176,11 @@ config AXP_DCDC2_VOLT
 	int "axp pmic dcdc2 voltage"
 	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER || AXP717_POWER || AXP803_POWER
 	default 900 if AXP818_POWER
-	default 1400 if AXP152_POWER || AXP209_POWER
+	default 1400 if AXP152_POWER || (AXP209_POWER && !MACH_SUN8I_V3)
 	default 1000 if AXP313_POWER
 	default 1000 if AXP717_POWER
 	default 1000 if AXP803_POWER
+	default 1250 if MACH_SUN8I_V3
 	default 1200 if MACH_SUN6I
 	default 1100 if MACH_SUN8I
 	default 0 if MACH_SUN9I
@@ -192,6 +193,7 @@ config AXP_DCDC2_VOLT
 	On A80 boards dcdc2 powers the GPU and can be left off.
 	On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
 	On R40 boards dcdc2 is VDD-CPU and should be 1.1V
+	On V3/S3 boards dcdc2 is VDD-CPU/VDD-SYS and should be 1.25V.
 	On boards using the AXP313 or AXP717 it's often VDD-CPU.
 
 config AXP_DCDC3_VOLT
@@ -199,9 +201,10 @@ config AXP_DCDC3_VOLT
 	depends on AXP152_POWER || AXP209_POWER || AXP221_POWER || AXP809_POWER || AXP818_POWER || AXP313_POWER || AXP717_POWER
 	default 900 if AXP809_POWER || AXP818_POWER
 	default 1500 if AXP152_POWER
-	default 1250 if AXP209_POWER
+	default 1250 if (AXP209_POWER && !MACH_SUN8I_V3)
 	default 1100 if AXP313_POWER
 	default 1100 if MACH_SUN8I_R40
+	default 3300 if MACH_SUN8I_V3
 	default 1200 if MACH_SUN6I || MACH_SUN8I
 	---help---
 	Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
@@ -213,6 +216,7 @@ config AXP_DCDC3_VOLT
 	On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
 	On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
 	On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
+	On V3/S3 boards dcdc3 is VCC-IO and should be 3.3V.
 	On boards using the AXP313 or AXP717 it's often VDD-DRAM and should
 	be 1.1V for LPDDR4.