diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
index 1a750c5f6fac..7d1da4463adf 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-2024.dts
@@ -181,6 +181,49 @@ reg_vcc5v: regulator-vcc5v { /* USB-C power input */
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	reg_lcd: regulator-gpio-lcd-vdd {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "vdd-lcd";
+		gpio = <&pio 8 15 GPIO_ACTIVE_HIGH>; // PI15
+		enable-active-high;
+	};
+
+	spi_lcd: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&pio 8 9 GPIO_ACTIVE_HIGH>; // PI9
+		mosi-gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>; // PI10
+		cs-gpios = <&pio 8 8 GPIO_ACTIVE_HIGH>; // PI8
+		num-chipselects = <1>;
+
+		panel: panel@0 {
+			compatible = "anbernic,rg35xx-plus-panel";
+
+			reg = <0>;
+
+			spi-max-frequency = <3125000>;
+			spi-3wire;
+
+			reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+			power-supply = <&reg_lcd>;
+
+			pinctrl-0 = <&lcd0_rgb888_pins>;
+			pinctrl-names = "default";
+
+			port {
+				panel_in_rgb: endpoint {
+					remote-endpoint = <&tcon_lcd0_out_lcd>;
+				};
+			};
+		};
+	};
 };
 
 &codec {
@@ -196,6 +239,10 @@ &cpu0 {