diff --git a/MAINTAINERS b/MAINTAINERS
index 419340093c9b..1d03b0060bda 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -29510,6 +29510,7 @@ M:	James Hilliard <james.hilliard1@gmail.com>
 L:	linux-sunxi@lists.linux.dev
 S:	Maintained
 F:	Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
+F:	drivers/mfd/ac200.c
 
 X-POWERS AXP288 PMIC DRIVERS
 M:	Hans de Goede <hansg@kernel.org>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 857ca3bb0d5b..6dea35c8c18e 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -205,6 +205,18 @@ config MFD_AC100
 	  This driver include only the core APIs. You have to select individual
 	  components like codecs or RTC under the corresponding menus.
 
+config MFD_AC200
+	tristate "X-Powers AC200"
+	depends on COMMON_CLK
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	help
+	  Support for the X-Powers AC200 mixed-signal companion IC. The AC200
+	  contains audio, video, RTC and Fast Ethernet PHY functions and is
+	  co-packaged with some Allwinner H6 and H616 SoCs. This driver provides
+	  the shared register access used by the individual function drivers.
+
 config MFD_AXP20X
 	tristate
 	select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 72d3944b0ad8..f8101d2a9ce9 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -150,6 +150,7 @@ obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
 
 obj-$(CONFIG_MFD_AC100)		+= ac100.o
+obj-$(CONFIG_MFD_AC200)		+= ac200.o
 obj-$(CONFIG_MFD_AXP20X)	+= axp20x.o
 obj-$(CONFIG_MFD_AXP20X_I2C)	+= axp20x-i2c.o
 obj-$(CONFIG_MFD_AXP20X_RSB)	+= axp20x-rsb.o
diff --git a/drivers/mfd/ac200.c b/drivers/mfd/ac200.c
new file mode 100644
index 000000000000..94aa13deb0f8
--- /dev/null
+++ b/drivers/mfd/ac200.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for the X-Powers AC200
+ *
+ * Copyright (C) 2019 Jernej Skrabec <jernej.skrabec@gmail.com>
+ * Copyright (C) 2026 James Hilliard <james.hilliard1@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#define AC200_SYS_CONTROL_REG			0x0002
+#define AC200_SYS_CONTROL_CHIP_RESET_DEASSERT	BIT(0)
+
+/* Interface register accessible from every register page. */
+#define AC200_TWI_REG_ADDR_H	0x00fe
+#define AC200_MAX_REG		0xa1f2
+
+static const struct regmap_range_cfg ac200_range_cfg[] = {
+	{
+		.range_max = AC200_MAX_REG,
+		.selector_reg = AC200_TWI_REG_ADDR_H,
+		.selector_mask = 0xff,
+		.window_len = 256,
+	},
+};
+
+/*
+ * Each AC200 sub-block can reset independently, invalidating its register
+ * contents without regmap's knowledge. Cache only the common page selector;
+ * this avoids a selector read-modify-write for every access on the same page
+ * without ever returning stale functional-register values.
+ */
+static bool ac200_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return reg != AC200_TWI_REG_ADDR_H;
+}
+
+static const struct regmap_config ac200_regmap_config = {
+	.name = "ac200",
+	.reg_bits = 8,
+	.reg_stride = 2,
+	.val_bits = 16,
+	.ranges = ac200_range_cfg,
+	.num_ranges = ARRAY_SIZE(ac200_range_cfg),
+	.max_register = AC200_MAX_REG,
+	.volatile_reg = ac200_volatile_reg,
+	.cache_type = REGCACHE_MAPLE,
+};
+
+static int ac200_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct regmap *regmap;
+	struct clk *clk;
+	int ret;
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk),
+				     "failed to enable input clock\n");
+
+	ret = devm_clk_rate_exclusive_get(dev, clk);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to lock clock rate\n");
+
+	regmap = devm_regmap_init_i2c(client, &ac200_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(dev, PTR_ERR(regmap),
+				     "failed to initialize regmap\n");
+
+	/*
+	 * No minimum delay is documented. Match the vendor driver's 40 ms delay
+	 * before its first AC200 register access after enabling the input clock.
+	 */
+	msleep(40);
+
+	ret = regmap_set_bits(regmap, AC200_SYS_CONTROL_REG,
+			      AC200_SYS_CONTROL_CHIP_RESET_DEASSERT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id ac200_of_match[] = {
+	{ .compatible = "x-powers,ac200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ac200_of_match);
+
+static const struct i2c_device_id ac200_i2c_ids[] = {
+	{ .name = "ac200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ac200_i2c_ids);
+
+static struct i2c_driver ac200_driver = {
+	.driver = {
+		.name = "ac200",
+		.of_match_table = ac200_of_match,
+	},
+	.probe = ac200_probe,
+	.id_table = ac200_i2c_ids,
+};
+module_i2c_driver(ac200_driver);
+
+MODULE_AUTHOR("James Hilliard <james.hilliard1@gmail.com>");
+MODULE_DESCRIPTION("X-Powers AC200 MFD core driver");
+MODULE_LICENSE("GPL");