diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index aa21f58a4..7025ba959 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-2024.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-h.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h700-anbernic-rg35xx-sp.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a523-teclast-p85t.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-a527-cubie-a5e.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-h728-x96qpro+.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun55i-t527-avaota-a1.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts b/arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts new file mode 100644 index 000000000..38a9c98ec --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523-teclast-p85t.dts @@ -0,0 +1,420 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright (C) 2026 Mikhail Kalashnikov + */ + +/dts-v1/; + +#include "sun55i-a523.dtsi" + +#include +#include + +/ { + model = "Teclast P85T"; + compatible = "teclast,p85t", "allwinner,sun55i-a523"; + chassis-type = "tablet"; + + aliases { + serial0 = &uart0; + }; + + battery: battery { + compatible = "simple-battery"; + constant-charge-current-max-microamp = <800000>; + voltage-max-design-microvolt = <4400000>; + charge-full-design-microamp-hours = <5000000>; + energy-full-design-microwatt-hours = <19250000>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + ext_osc32k: ext-osc32k-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "ext_osc32k"; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&axp717_adc 3>, /* vsys_v */ + <&axp717_adc 4>; /* pmic_temp */ + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply from the USB-C connector */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_pio18: pio-18 { + compatible = "regulator-fixed"; + regulator-name = "pio-18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_vmmc1: vmmc1 { + compatible = "regulator-fixed"; + regulator-name = "vcc-wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_aldo3>; + gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + enable-active-high; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */ + post-power-on-delay-ms = <200>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&gpu { + mali-supply = <®_dcdc2>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; + + touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <7 9 IRQ_TYPE_EDGE_FALLING>; /* PH9 */ + power-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + touchscreen-size-x = <1786>; + touchscreen-size-y = <1128>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + silead,max-fingers = <5>; + avdd-supply = <®_cldo2>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + accelerometer@26 { + compatible = "miramems,da280"; + reg = <0x26>; + interrupt-parent = <&pio>; + interrupts = <7 11 IRQ_TYPE_LEVEL_LOW>; /* PH11 */ + }; +}; + +&mmc0 { + vmmc-supply = <®_cldo3>; + cd-gpios = <&pio 5 6 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PF6 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vmmc1>; + vqmmc-supply = <®_bldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + vmmc-supply = <®_cldo3>; + vqmmc-supply = <®_cldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_pio18>; + vcc-pe-supply = <®_pio18>; + vcc-pf-supply = <®_pio18>; + vcc-pg-supply = <®_pio18>; +}; + +&r_i2c0 { + status = "okay"; + + axp717: pmic@34 { + compatible = "x-powers,axp717"; + reg = <0x34>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + vin4-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; + + axp717_adc: adc { + compatible = "x-powers,axp717-adc"; + #io-channel-cells = <1>; + }; + + battery-power { + compatible = "x-powers,axp717-battery-power-supply"; + monitored-battery = <&battery>; + }; + + regulators { + /* Supplies the "little" cluster (1.0(?) GHz cores) */ + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpul"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <920000>; + regulator-max-microvolt = <920000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1260000>; + regulator-max-microvolt = <1260000>; + regulator-name = "vdd-dram"; + }; + + reg_dcdc4: dcdc4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd-dcdc4"; + }; + + reg_aldo1: aldo1 { + /* camera sensor AVDD */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; + }; + + reg_aldo2: aldo2 { + /* camera sensor IOVDD */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "iovdd-csi"; + }; + + reg_aldo3: aldo3 { + /* supplies the I2C pins for this PMIC and the WiFi module */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl-pm"; + }; + + reg_aldo4: aldo4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pll-dxco-avcc"; + }; + + reg_bldo1: bldo1 { + /* WiFi module 1.8V */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-wifi-1v8"; + }; + + reg_bldo2: bldo2 { + /* WiFi module 1.8V */ + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-wifi-1v8-b"; + }; + + reg_bldo3: bldo3 { + /* camera sensor DVDD/cameravdd */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-csi"; + }; + + reg_bldo4: bldo4 { + /* camera sensor DVDD */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "dvdd-csi"; + }; + + reg_cldo1: cldo1 { + /* codec CPVIN, SD/eMMC 1.8V IO */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-codec-sd"; + }; + + reg_cldo2: cldo2 { + /* touch panel supply */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ctp"; + }; + + reg_cldo3: cldo3 { + /* SD/eMMC VMMC, codec VDD, UART0, g-sensor */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-io-mmc"; + }; + + reg_cldo4: cldo4 { + /* LCD panel supply */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-lcd"; + }; + + reg_cpusldo: cpusldo { + /* supplies the management core */ + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-cpus"; + }; + }; + + usb-power { + compatible = "x-powers,axp717-usb-power-supply"; + input-current-limit-microamp = <1750000>; + }; + }; + + axp323: pmic@36 { + compatible = "x-powers,axp323"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + reg_aldo1_323: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-aldo1-323"; + }; + + reg_dldo1_323: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-dldo1-323"; + }; + + /* Supplies the "big" cluster (1.8 GHz cores) */ + reg_dcdc1_323: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1160000>; + regulator-name = "vdd-cpub"; + }; + + /* DCDC2 is polyphased with DCDC1 */ + + reg_dcdc3_323: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd-dcdc3"; + }; + }; + }; +}; + +&r_pio { +/* + * Specifying the supply would create a circular dependency. + * + * vcc-pl-supply = <®_aldo3>; + */ + vcc-pm-supply = <®_aldo3>; +}; + +&rtc { + clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>, + <&r_ccu CLK_R_AHB>, <&ext_osc32k>; + clock-names = "bus", "hosc", "ahb", "ext-osc32k"; + assigned-clocks = <&rtc CLK_OSC32K>; + assigned-clock-rates = <32768>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + /* Bluetooth HCI, 4-wire with RTS/CTS */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&usb_otg { + /* + * The USB-C port is the primary power supply; VBUS control is not + * wired in mainline (AXP717 has no drivevbus), so the port can only + * act as a USB device powered from the host side. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_vcc5v>; + status = "okay"; +};