diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 4fc96b317d79..83c30b39f704 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -287,6 +287,8 @@ struct stmmac_priv {
 
 	unsigned int pause_time;
 	struct mii_bus *mii;
+	struct gpio_desc *mdio_reset_gpio;
+	u32 mdio_reset_delays[3];
 
 	struct stmmac_pcs *integrated_pcs;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index afe98ff5bdcb..63287ad9652f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -384,33 +384,16 @@ int stmmac_mdio_reset(struct mii_bus *bus)
 	struct stmmac_priv *priv = netdev_priv(bus->priv);
 	unsigned int mii_address = priv->hw->mii.addr;
 
-#ifdef CONFIG_OF
-	if (priv->device->of_node) {
-		struct gpio_desc *reset_gpio;
-		u32 delays[3] = { 0, 0, 0 };
+	if (priv->mdio_reset_delays[0])
+		msleep(DIV_ROUND_UP(priv->mdio_reset_delays[0], 1000));
 
-		reset_gpio = devm_gpiod_get_optional(priv->device,
-						     "snps,reset",
-						     GPIOD_OUT_LOW);
-		if (IS_ERR(reset_gpio))
-			return PTR_ERR(reset_gpio);
+	gpiod_set_value_cansleep(priv->mdio_reset_gpio, 1);
+	if (priv->mdio_reset_delays[1])
+		msleep(DIV_ROUND_UP(priv->mdio_reset_delays[1], 1000));
 
-		device_property_read_u32_array(priv->device,
-					       "snps,reset-delays-us",
-					       delays, ARRAY_SIZE(delays));
-
-		if (delays[0])
-			msleep(DIV_ROUND_UP(delays[0], 1000));
-
-		gpiod_set_value_cansleep(reset_gpio, 1);
-		if (delays[1])
-			msleep(DIV_ROUND_UP(delays[1], 1000));
-
-		gpiod_set_value_cansleep(reset_gpio, 0);
-		if (delays[2])
-			msleep(DIV_ROUND_UP(delays[2], 1000));
-	}
-#endif
+	gpiod_set_value_cansleep(priv->mdio_reset_gpio, 0);
+	if (priv->mdio_reset_delays[2])
+		msleep(DIV_ROUND_UP(priv->mdio_reset_delays[2], 1000));
 
 	/* This is a workaround for problems with the STE101P PHY.
 	 * It doesn't complete its reset until at least one clock cycle
@@ -608,6 +591,23 @@ int stmmac_mdio_register(struct net_device *ndev)
 	if (!mdio_bus_data)
 		return 0;
 
+	/* Resume calls stmmac_mdio_reset() even when registration does not
+	 * install a bus reset callback, so cache its resources in both cases.
+	 */
+	if (IS_ENABLED(CONFIG_STMMAC_PLATFORM) && dev_of_node(priv->device) &&
+	    (!mdio_node || of_device_is_available(mdio_node))) {
+		priv->mdio_reset_gpio =
+			devm_gpiod_get_optional(priv->device, "snps,reset",
+						GPIOD_OUT_LOW);
+		if (IS_ERR(priv->mdio_reset_gpio))
+			return PTR_ERR(priv->mdio_reset_gpio);
+
+		device_property_read_u32_array(priv->device,
+					       "snps,reset-delays-us",
+					       priv->mdio_reset_delays,
+					       ARRAY_SIZE(priv->mdio_reset_delays));
+	}
+
 	stmmac_mdio_bus_config(priv);
 
 	new_bus = mdiobus_alloc();