mbox series

[v2,0/4] Introduce Allwinner H616 PWM controller

Message ID 20251217082504.80226-1-richard.genoud@bootlin.com (mailing list archive)
Headers
Series Introduce Allwinner H616 PWM controller |

Message

Richard Genoud Dec. 17, 2025, 8:25 a.m. UTC 
Allwinner H616 PWM controller is quite different from the A10 one.

It can drive 6 PWM channels, and like for the A10, each channel has a
bypass that permits to output a clock, bypassing the PWM logic, when
enabled.

But, the channels are paired 2 by 2, sharing a first set of
MUX/prescaler/gate.
Then, for each channel, there's another prescaler (that will be bypassed
if the bypass is enabled for this channel).

It looks like that:
            _____      ______      ________
OSC24M --->|     |    |      |    |        |
APB1 ----->| Mux |--->| Gate |--->| /div_m |-----> PWM_clock_src_xy
           |_____|    |______|    |________|
                          ________
                         |        |
                      +->| /div_k |---> PWM_clock_x
                      |  |________|
                      |    ______
                      |   |      |
                      +-->| Gate |----> PWM_bypass_clock_x
                      |   |______|
PWM_clock_src_xy -----+   ________
                      |  |        |
                      +->| /div_k |---> PWM_clock_y
                      |  |________|
                      |    ______
                      |   |      |
                      +-->| Gate |----> PWM_bypass_clock_y
                          |______|

Where xy can be 0/1, 2/3, 4/5

PWM_clock_x/y serve for the PWM purpose.
PWM_bypass_clock_x/y serve for the clock-provider purpose.
The common clock framework has been used to manage those clocks.

This PWM driver serves as a clock-provider for PWM_bypass_clocks.
This is needed for example by the embedded AC300 PHY which clock comes
from PMW5 pin (PB12).

This series is based onto v6.19-rc1

Changes since v1:
- rebase onto v6.19-rc1
- add missing headers
- remove MODULE_ALIAS (suggested by Krzysztof)
- use sun4i-pwm binding instead of creating a new one (suggested by Krzysztof)
- retrieve the parent clocks from the devicetree
- switch num_parents to unsigned int

Richard Genoud (4):
  dt-bindings: pwm: allwinner: add h616 pwm compatible
  pwm: sun50i: Add H616 PWM support
  arm64: dts: allwinner: h616: add PWM controller
  MAINTAINERS: Add entry on Allwinner H616 PWM driver

 .../bindings/pwm/allwinner,sun4i-a10-pwm.yaml |  19 +-
 MAINTAINERS                                   |   5 +
 .../arm64/boot/dts/allwinner/sun50i-h616.dtsi |  47 +
 drivers/pwm/Kconfig                           |  12 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-sun50i-h616.c                 | 892 ++++++++++++++++++
 6 files changed, 975 insertions(+), 1 deletion(-)
 create mode 100644 drivers/pwm/pwm-sun50i-h616.c


base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8