mbox series

[v5,0/6] Add support for Baijie Helper A133 board

Message ID 20260623204824.691832-1-alexander.sverdlin@gmail.com (mailing list archive)
Headers
Series Add support for Baijie Helper A133 board |

Message

Alexander Sverdlin June 23, 2026, 8:48 p.m. UTC 
Baijie Helper A133 board is a development board around Baijie A133 Core
SBC. Features:

- 1/2/4GiB LPDDR4 DRAM
- 8/16/32GiB eMMC
- AXP707 PMIC
- USB-C OTG port in peripheral mode (via onboard hub)
- 2 USB 2.0 ports
- MicroSD slot and on-board eMMC module
- Gigabit Ethernet
- Bluetooth
- WiFi

Add initial support for both the Helper and Core boards, including UART,
PMU, eMMC, USB, Ethernet, LRADC-connected buttons.

UART1 can only be used for Bluetooth module, but BT-WiFi combo Allwinner
AW869A chip has not mainline driver currently.

Link: https://szbaijie.com/index/product/product_detail.html?product_id=23&language=en

Changelog:
v5:
- sun50i-a100.dtsi: reflowed "compatible" property of lradc node
- dropped "reserve RAM for ATF" patch [v4 6/7]
v4:
- reserve RAM for ATF
- sun4i-lradc-keys: Add A100/A133 compatible
- dt-bindings: renamed "Baijie Helper A133" -> "Baijie A133 HelperBoard"
- dt-bindings: renamed "baijie,helper-a133" -> "baijie,helperboard-a133"
- dt-bindings: introduced allwinner,sun50i-a100-lradc
- reserve RAM for ATF
- renamed "sun50i-a133-baijie-helper.dtb" -> "sun50i-a133-helperboard.dtb"
- added "model" property into root of sun50i-a133-helperboard-core.dtsi
- added "cap-mmc-highspeed" and "max-frequency" into &mmc2
- added "x-powers,drive-vbus-en" and "*-supply" into &axp803
- dropped all "regulator-enable-ramp-delay" properties
- replaced &reg_dcdc3 with a "polyphased" comment
- exact DRAM voltage in &reg_dcdc5
- disabled &reg_dcdc6 to avoid "[   31.710641] dcdc6: disabling"
- added &reg_vdd5v "root" regulator
- added "disable-wp" into &mmc0
- commented &usb_otg
- assigned usb1_vbus-supply in &usbphy
- https://lore.kernel.org/all/20260605070923.3045073-1-alexander.sverdlin@gmail.com/
v3:
- added lradc node to sun50i-a100.dtsi
- enabled LRADC driver in arm64 defconfig
- added my copyrights into the newly introduced DTs
- all DT nodes sorted alphabetically
- all always-on regulators commented/propetly named
- all regulators got proper voltages (not default ranges)
- ADC-sensed buttons K1..K5 added
- re-labelled "eth_phy" -> "rgmii_phy"
- usbphy 0 switched from host into peripheral mode (downstream from an
  onboard hub)
- typo sun50i-a133-baije-core.dtsi -> sun50i-a133-baijie-core.dtsi
- https://lore.kernel.org/all/20260517234134.2737320-1-alexander.sverdlin@gmail.com/
v2:
- introduced baijie,helper-a133-core compatible for the Core (SoM) board
- https://lore.kernel.org/all/20260510201644.4143710-1-alexander.sverdlin@gmail.com/
v1:
- https://lore.kernel.org/all/20260503191842.2736130-1-alexander.sverdlin@gmail.com/

Alexander Sverdlin (6):
  arm64: defconfig: Enable Allwinner LRADC input driver
  dt-bindings: vendor-prefixes: Add Shenzhen Baijie Technology Co., Ltd.
  dt-bindings: arm: sunxi: Add Baijie HelperBoard A133 compatible
  dt-bindings: input: sun4i-lradc-keys: Add A100/A133 compatible
  arm64: dts: allwinner: a100: Add LRADC node
  arm64: dts: allwinner: A133: add support for Baijie Helper A133 board

 .../devicetree/bindings/arm/sunxi.yaml        |   6 +
 .../input/allwinner,sun4i-a10-lradc-keys.yaml |   1 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  10 +
 .../sun50i-a133-helperboard-core.dtsi         | 197 ++++++++++++++++++
 .../dts/allwinner/sun50i-a133-helperboard.dts | 148 +++++++++++++
 arch/arm64/configs/defconfig                  |   1 +
 8 files changed, 366 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a133-helperboard-core.dtsi
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a133-helperboard.dts

Comments

Chen-Yu Tsai June 29, 2026, 3:51 p.m. UTC | #1 
On Tue, 23 Jun 2026 22:48:12 +0200, Alexander Sverdlin wrote:
> Baijie Helper A133 board is a development board around Baijie A133 Core
> SBC. Features:
> 
> - 1/2/4GiB LPDDR4 DRAM
> - 8/16/32GiB eMMC
> - AXP707 PMIC
> - USB-C OTG port in peripheral mode (via onboard hub)
> - 2 USB 2.0 ports
> - MicroSD slot and on-board eMMC module
> - Gigabit Ethernet
> - Bluetooth
> - WiFi
> 
> [...]

Applied to sunxi/config-for-7.3 in local tree, thanks!

[1/6] arm64: defconfig: Enable Allwinner LRADC input driver
      commit: b4158103c45386ab30ba7624bee17ebf33940baa

Best regards,
Chen-Yu Tsai June 29, 2026, 4:08 p.m. UTC | #2 
On Tue, 23 Jun 2026 22:48:12 +0200, Alexander Sverdlin wrote:
> Baijie Helper A133 board is a development board around Baijie A133 Core
> SBC. Features:
> 
> - 1/2/4GiB LPDDR4 DRAM
> - 8/16/32GiB eMMC
> - AXP707 PMIC
> - USB-C OTG port in peripheral mode (via onboard hub)
> - 2 USB 2.0 ports
> - MicroSD slot and on-board eMMC module
> - Gigabit Ethernet
> - Bluetooth
> - WiFi
> 
> [...]

Applied to sunxi/dt-for-7.3 in local tree, thanks!

[2/6] dt-bindings: vendor-prefixes: Add Shenzhen Baijie Technology Co., Ltd.
      commit: c3600c97eb9c1a20a933a7fba08272955f7a7ccc
[3/6] dt-bindings: arm: sunxi: Add Baijie HelperBoard A133 compatible
      commit: 1d81cb06c30746448deb73b6ce9ceccc9fb6ca37
[4/6] dt-bindings: input: sun4i-lradc-keys: Add A100/A133 compatible
      commit: 5e5e8a2e5a5e31fbe8858f08ef7ac44dff9ee351
[5/6] arm64: dts: allwinner: a100: Add LRADC node
      commit: 8fa3a2bf77f0adb5440f25c3e2951543691e1536
[6/6] arm64: dts: allwinner: A133: add support for Baijie Helper A133 board
      commit: 7204944dcb8f1131b6303a5e9ca11128eb20ac21

Best regards,