diff mbox series

[2/2] sunxi: H616: add support for YuzukiHD Chameleon board

Message ID 20250612231945.981893-3-andre.przywara@arm.com (mailing list archive)
State New
Headers
Series sunxi: add YuzukiHD Chameleon board support |

Commit Message

Andre Przywara June 12, 2025, 11:19 p.m. UTC 
The Chameleon board is an OpenHardware devboard made by YuzukiTsuru,
featuring an Allwinner H616 SoC. The form factor resembles the Raspberry
Pi Model A boards, though it differs significantly in its features.
Apart from the usual peripherals of those kind of boards (SD card, eMMC,
WiFi, HDMI), it features four USB-C 2.0 ports.

Add a defconfig for the board, the DRAM parameters have been extracted
from the firmware shipped with the board.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 configs/yuzukihd-chameleon_defconfig | 30 ++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 configs/yuzukihd-chameleon_defconfig
diff mbox series

Patch

diff --git a/configs/yuzukihd-chameleon_defconfig b/configs/yuzukihd-chameleon_defconfig
new file mode 100644
index 00000000000..883be12c4ef
--- /dev/null
+++ b/configs/yuzukihd-chameleon_defconfig
@@ -0,0 +1,30 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="allwinner/sun50i-h618-yuzukihd-chameleon"
+CONFIG_SPL=y
+CONFIG_DRAM_SUNXI_DX_ODT=0x03030303
+CONFIG_DRAM_SUNXI_DX_DRI=0x0e0e0e0e
+CONFIG_DRAM_SUNXI_CA_DRI=0x1c12
+CONFIG_DRAM_SUNXI_ODT_EN=0x1
+CONFIG_DRAM_SUNXI_TPR6=0x33808080
+CONFIG_DRAM_SUNXI_TPR10=0x002f0006
+CONFIG_DRAM_SUNXI_TPR11=0xddddcccc
+CONFIG_DRAM_SUNXI_TPR12=0xeddc7564
+CONFIG_MACH_SUN50I_H616=y
+CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
+CONFIG_DRAM_CLK=648
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_R_I2C_ENABLE=y
+CONFIG_SPL_SPI_SUNXI=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_SYS_I2C_SLAVE=0x7f
+CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_AXP313_POWER=y
+CONFIG_AXP_DCDC3_VOLT=1500
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y