diff mbox series

[2/2] sunxi: a527: radxa/avaota: enable Ethernet

Message ID 20250801002726.8924-3-andre.przywara@arm.com (mailing list archive)
State New
Headers
Series sunxi: a523: enable Ethernet |

Commit Message

Andre Przywara Aug. 1, 2025, 12:27 a.m. UTC 
The first of the two Ethernet controllers in the Allwinner A527/T527 is
compatible to the MAC from the previous SoCs. Consequently the recent DT
update brought use the MAC node, using the A64 compatible string as the
fallback, which works out of the box.

Enable the sun8i-emac Ethernet driver in the defconfig for the Radxa and
the Avaota boards, so that kernels and other data can be loaded via
TFTP. Please note that only one of the Ethernet sockets will work, the
second MAC is not compatible, and needs a new U-Boot driver. The
X96QPro+ TV box unfortunately uses only this second EMAC, so Ethernet
cannot be used there at the moment.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 configs/avaota-a1_defconfig       | 2 ++
 configs/radxa-cubie-a5e_defconfig | 2 ++
 2 files changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/configs/avaota-a1_defconfig b/configs/avaota-a1_defconfig
index 55457edd3b3..a4582c00d5b 100644
--- a/configs/avaota-a1_defconfig
+++ b/configs/avaota-a1_defconfig
@@ -22,6 +22,8 @@  CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
 CONFIG_REGULATOR_AXP=y
 CONFIG_AXP717_POWER=y
 CONFIG_AXP_I2C_ADDRESS=0x35
diff --git a/configs/radxa-cubie-a5e_defconfig b/configs/radxa-cubie-a5e_defconfig
index 88019acf576..9d204ef5548 100644
--- a/configs/radxa-cubie-a5e_defconfig
+++ b/configs/radxa-cubie-a5e_defconfig
@@ -22,6 +22,8 @@  CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000
 CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
 CONFIG_REGULATOR_AXP=y
 CONFIG_AXP717_POWER=y
 CONFIG_AXP_DCDC2_VOLT=920