@@ -5,7 +5,7 @@
#include "sun50i-a64-sopine-baseboard.dts"
/ {
- model = "Pine64 LTS";
+ model = "Pine64 PINE A64 LTS";
compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
"allwinner,sun50i-a64";
@@ -4,7 +4,7 @@
#include "sun50i-a64-pine64.dts"
/ {
- model = "Pine64+";
+ model = "Pine64 PINE A64+";
compatible = "pine64,pine64-plus", "allwinner,sun50i-a64";
/* TODO: Camera, touchscreen, etc. */
@@ -9,7 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine64";
+ model = "Pine64 PINE A64";
compatible = "pine64,pine64", "allwinner,sun50i-a64";
aliases {
@@ -124,6 +124,17 @@
status = "okay";
};
+/* On Wifi/BT connector */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo4>;
+ vqmmc-supply = <®_eldo1>;
+ bus-width = <4>;
+ non-removable;
+ status = "disabled";
+};
+
&ohci0 {
status = "okay";
};
@@ -286,6 +297,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "disabled";
};
@@ -13,7 +13,7 @@
#include <dt-bindings/pwm/pwm.h>
/ {
- model = "Pinebook";
+ model = "Pine64 Pinebook";
compatible = "pine64,pinebook", "allwinner,sun50i-a64";
chassis-type = "laptop";
@@ -390,6 +390,8 @@
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_rgb666_pins>;
+ assigned-clocks = <&ccu CLK_TCON0>;
+ assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
status = "okay";
};
@@ -188,12 +188,30 @@
&i2c1 {
status = "okay";
+ /* Alternative magnetometer */
+ af8133j: magnetometer@1c {
+ compatible = "voltafield,af8133j";
+ reg = <0x1c>;
+ reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>;
+ avdd-supply = <®_dldo1>;
+ dvdd-supply = <®_dldo1>;
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+
+ /* status will be fixed up in firmware */
+ status = "disabled";
+ };
+
/* Magnetometer */
lis3mdl: magnetometer@1e {
compatible = "st,lis3mdl-magn";
reg = <0x1e>;
vdd-supply = <®_dldo1>;
vddio-supply = <®_dldo1>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
};
/* Light/proximity sensor */
@@ -212,6 +230,9 @@
interrupts = <7 5 IRQ_TYPE_EDGE_RISING>; /* PH5 */
vdd-supply = <®_dldo1>;
vddio-supply = <®_dldo1>;
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
};
};
@@ -9,7 +9,7 @@
#include "sun50i-a64-pinetab.dts"
/ {
- model = "PineTab, Early Adopter's version";
+ model = "Pine64 PineTab Early Adopter";
compatible = "pine64,pinetab-early-adopter", "allwinner,sun50i-a64";
};
@@ -14,7 +14,7 @@
#include <dt-bindings/pwm/pwm.h>
/ {
- model = "PineTab, Development Sample";
+ model = "Pine64 PineTab Developer Sample";
compatible = "pine64,pinetab", "allwinner,sun50i-a64";
chassis-type = "tablet";
@@ -8,7 +8,7 @@
#include "sun50i-a64-sopine.dtsi"
/ {
- model = "SoPine with baseboard";
+ model = "Pine64 SOPINE on Baseboard carrier board";
compatible = "pine64,sopine-baseboard", "pine64,sopine",
"allwinner,sun50i-a64";
@@ -103,6 +103,17 @@
};
};
+/* On Wifi/BT connector */
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo4>;
+ vqmmc-supply = <®_eldo1>;
+ bus-width = <4>;
+ non-removable;
+ status = "disabled";
+};
+
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
@@ -175,6 +186,14 @@
status = "okay";
};
+/* On Wifi/BT connector, with RTS/CTS */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
/* On Pi-2 connector */
&uart2 {
pinctrl-names = "default";
@@ -369,6 +369,8 @@
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_rgb666_pins>;
+ assigned-clocks = <&ccu CLK_TCON0>;
+ assigned-clock-parents = <&ccu CLK_PLL_VIDEO0_2X>;
status = "okay";
};
@@ -51,10 +51,16 @@
device_type = "cpu";
reg = <0>;
enable-method = "psci";
- next-level-cache = <&L2>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu1: cpu@1 {
@@ -62,10 +68,16 @@
device_type = "cpu";
reg = <1>;
enable-method = "psci";
- next-level-cache = <&L2>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu2: cpu@2 {
@@ -73,10 +85,16 @@
device_type = "cpu";
reg = <2>;
enable-method = "psci";
- next-level-cache = <&L2>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu3: cpu@3 {
@@ -84,16 +102,25 @@
device_type = "cpu";
reg = <3>;
enable-method = "psci";
- next-level-cache = <&L2>;
clocks = <&ccu CLK_CPUX>;
clock-names = "cpu";
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
- L2: l2-cache {
+ l2_cache: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};
@@ -236,6 +263,14 @@
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 1>;
+
+ trips {
+ gpu0_crit: gpu0-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
gpu1_thermal: gpu1-thermal {
@@ -243,6 +278,14 @@
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 2>;
+
+ trips {
+ gpu1_crit: gpu1-crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
};
@@ -402,6 +445,8 @@
clock-names = "ahb", "tcon-ch0";
clock-output-names = "tcon-data-clock";
#clock-cells = <0>;
+ assigned-clocks = <&ccu CLK_TCON0>;
+ assigned-clock-parents = <&ccu CLK_PLL_MIPI>;
resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
reset-names = "lcd", "lvds";
@@ -45,16 +45,40 @@
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_vcc3v3>;
+ };
+
+ reg_gmac_2v5: gmac-2v5 {
+ /* 2V5 supply for GMAC PHY IO */
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-2v5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ vin-supply = <®_vcc3v3>;
+ };
+
+ reg_vcc5v: regulator-vcc5v {
+ /* board 5V supply from micro USB or pin headers */
+ compatible = "regulator-fixed";
+ regulator-name = "vcc-5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
};
reg_vcc3v3: vcc3v3 {
+ /* board 3V3 supply by SY8089A */
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <®_vcc5v>;
};
vdd_cpux: gpio-regulator {
+ /* cpu voltage regulator MP2143DJ */
compatible = "regulator-gpio";
regulator-name = "vdd-cpux";
regulator-type = "voltage";
@@ -66,6 +90,7 @@
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
gpios-states = <0x1>;
states = <1100000 0>, <1300000 1>;
+ vin-supply = <®_vcc5v>;
};
wifi_pwrseq: pwrseq {
@@ -111,6 +136,7 @@
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
status = "okay";
};
@@ -146,6 +172,18 @@
status = "okay";
};
+&pio {
+ vcc-pa-supply = <®_vcc3v3>;
+ vcc-pc-supply = <®_vcc3v3>;
+ vcc-pd-supply = <®_gmac_2v5>;
+ vcc-pf-supply = <®_vcc3v3>;
+ vcc-pg-supply = <®_vcc3v3>;
+};
+
+&r_pio {
+ vcc-pl-supply = <®_vcc3v3>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pa_pins>;
@@ -88,6 +88,7 @@
&mmc0 {
vmmc-supply = <®_vcc3v3>;
+ disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
@@ -157,6 +157,7 @@
&mmc0 {
vmmc-supply = <®_vcc3v3>;
+ disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
@@ -153,6 +153,7 @@
&mmc0 {
vmmc-supply = <®_vcc3v3>;
+ disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
@@ -153,6 +153,7 @@
&mmc0 {
vmmc-supply = <®_vcc3v3>;
+ disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
@@ -82,6 +82,7 @@
&mmc0 {
vmmc-supply = <®_vcc3v3>;
+ disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
status = "okay";
@@ -79,6 +79,7 @@
&mmc0 {
vmmc-supply = <®_vcc3v3>;
+ disable-wp;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
@@ -16,7 +16,6 @@
reg = <0>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
};
@@ -26,7 +25,6 @@
reg = <1>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
};
@@ -36,7 +34,6 @@
reg = <2>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
};
@@ -46,7 +43,6 @@
reg = <3>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
};
};
@@ -207,7 +203,7 @@
};
cooling-maps {
- cpu-hot-limit {
+ map0 {
trip = <&cpu_hot_trip>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -129,6 +129,7 @@
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
bus-width = <4>;
status = "okay";
};
@@ -151,28 +152,12 @@
vcc-pg-supply = <®_aldo1>;
};
-&r_ir {
- linux,rc-map-name = "rc-beelink-gs1";
- status = "okay";
-};
-
-&r_pio {
- /*
- * FIXME: We can't add that supply for now since it would
- * create a circular dependency between pinctrl, the regulator
- * and the RSB Bus.
- *
- * vcc-pl-supply = <®_aldo1>;
- */
- vcc-pm-supply = <®_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
status = "okay";
- axp805: pmic@745 {
+ axp805: pmic@36 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x745>;
+ reg = <0x36>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -290,6 +275,22 @@
};
};
+&r_ir {
+ linux,rc-map-name = "rc-beelink-gs1";
+ status = "okay";
+};
+
+&r_pio {
+ /*
+ * PL0 and PL1 are used for PMIC I2C
+ * don't enable the pl-supply else
+ * it will fail at boot
+ *
+ * vcc-pl-supply = <®_aldo1>;
+ */
+ vcc-pm-supply = <®_aldo1>;
+};
+
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pin>;
@@ -131,6 +131,7 @@
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
bus-width = <4>;
status = "okay";
};
@@ -143,7 +144,7 @@
non-removable;
status = "okay";
- brcm: sdio-wifi@1 {
+ brcm: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
@@ -175,16 +176,12 @@
vcc-pg-supply = <®_vcc_wifi_io>;
};
-&r_ir {
- status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
status = "okay";
- axp805: pmic@745 {
+ axp805: pmic@36 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x745>;
+ reg = <0x36>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -295,6 +292,10 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
&rtc {
clocks = <&ext_osc32k>;
};
@@ -28,7 +28,7 @@
non-removable;
status = "okay";
- brcm: sdio-wifi@1 {
+ brcm: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
@@ -94,6 +94,7 @@
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
bus-width = <4>;
status = "okay";
};
@@ -112,20 +113,12 @@
vcc-pg-supply = <®_aldo1>;
};
-&r_ir {
- status = "okay";
-};
-
-&r_pio {
- vcc-pm-supply = <®_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
status = "okay";
- axp805: pmic@745 {
+ axp805: pmic@36 {
compatible = "x-powers,axp805", "x-powers,axp806";
- reg = <0x745>;
+ reg = <0x36>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -240,6 +233,14 @@
};
};
+&r_ir {
+ status = "okay";
+};
+
+&r_pio {
+ vcc-pm-supply = <®_bldo3>;
+};
+
&rtc {
clocks = <&ext_osc32k>;
};
@@ -8,7 +8,7 @@
/delete-node/ ®_gmac_3v3;
/ {
- model = "Pine H64 model B";
+ model = "Pine64 PINE H64 Model B";
compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
wifi_pwrseq: pwrseq {
@@ -9,7 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Pine H64 model A";
+ model = "Pine64 PINE H64 Model A";
compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
aliases {
@@ -133,6 +133,7 @@
&mmc0 {
vmmc-supply = <®_cldo1>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
bus-width = <4>;
status = "okay";
};
@@ -124,6 +124,7 @@
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ disable-wp;
bus-width = <4>;
status = "okay";
};
@@ -27,8 +27,14 @@
reg = <0>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu1: cpu@1 {
@@ -37,8 +43,14 @@
reg = <1>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu2: cpu@2 {
@@ -47,8 +59,14 @@
reg = <2>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
};
cpu3: cpu@3 {
@@ -57,8 +75,23 @@
reg = <3>;
enable-method = "psci";
clocks = <&ccu CLK_CPUX>;
- clock-latency-ns = <244144>; /* 8 32k periods */
#cooling-cells = <2>;
+ i-cache-size = <0x8000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&l2_cache>;
+ };
+
+ l2_cache: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
+ cache-size = <0x80000>;
+ cache-line-size = <64>;
+ cache-sets = <512>;
};
};