diff mbox series

[v11,16/74] drm/bridge: Add bridge ops for source-side HDMI 2.0 scrambling

Message ID 20260901-dw-hdmi-qp-scramb-v11-16-bc12954a0688@collabora.com (mailing list archive)
State New
Headers
Series Add HDMI 2.0 support to DW HDMI QP TX |

Commit Message

Cristian Ciocaltea Sept. 1, 2026, 6:50 p.m. UTC 
Bridges advertising HDMI 2.0 must be able to enable and disable
source-side scrambling and the high TMDS clock ratio when the configured
mode exceeds 340 MHz.

Add .hdmi_scrambler_{enable|disable}() callbacks covering the
source-side programming only; sink-side SCDC negotiation remains the job
of the HDMI connector helpers.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 include/drm/drm_bridge.h | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)
diff mbox series

Patch

diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index 5a5a25995471..77b3ffe69230 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -561,6 +561,41 @@  struct drm_bridge_funcs {
 				     const struct drm_display_mode *mode,
 				     unsigned long long tmds_rate);
 
+	/**
+	 * @hdmi_scrambler_enable:
+	 *
+	 * Enable source-side scrambling and the high TMDS clock ratio for the
+	 * mode currently being applied.
+	 *
+	 * This only programs the source side. Sink-side SCDC configuration is
+	 * handled by the HDMI connector helpers.
+	 *
+	 * Mandatory for bridges that set the DRM_BRIDGE_OP_HDMI flag in their
+	 * &drm_bridge->ops and advertise HDMI_VERSION_2_0 or later via
+	 * &drm_bridge->supported_hdmi_ver; unused otherwise.
+	 *
+	 * Returns:
+	 * 0 on success, a negative error code otherwise.
+	 */
+	int (*hdmi_scrambler_enable)(struct drm_bridge *bridge);
+
+	/**
+	 * @hdmi_scrambler_disable:
+	 *
+	 * Disable source-side scrambling and the high TMDS clock ratio.
+	 *
+	 * This only programs the source side. Sink-side SCDC configuration is
+	 * handled by the HDMI connector helpers.
+	 *
+	 * Mandatory for bridges that set the DRM_BRIDGE_OP_HDMI flag in their
+	 * &drm_bridge->ops and advertise HDMI_VERSION_2_0 or later via
+	 * &drm_bridge->supported_hdmi_ver; unused otherwise.
+	 *
+	 * Returns:
+	 * 0 on success, a negative error code otherwise.
+	 */
+	int (*hdmi_scrambler_disable)(struct drm_bridge *bridge);
+
 	/**
 	 * @hdmi_clear_avi_infoframe:
 	 *