[net-next,v7,0/6] net: stmmac: Add support for Allwinner A523 GMAC200

From: Chen-Yu Tsai <wens@csie.org>

Hi everyone,

This is v7 of my Allwinner A523 GMAC200 support series. This is based on
next-20250922.

Changes since v6:
- Collected acks for DT binding patch
- Rebased onto next-20250922

Changes since v5:
- Use plat->phy_interface instead of plat->mac_interface (Russell)
- Link to v5
  https://lore.kernel.org/all/20250911174032.3147192-1-wens@kernel.org/

Changes since v4:
- Moved clock-names list to main schema in DT binding (Rob)
- Dropped 4 patches that are already merged
- Link to v4
  https://lore.kernel.org/all/20250908181059.1785605-1-wens@kernel.org/

Changes since v3:
- driver
  - Fixed printf format specifier warning
- Link to v3
  https://lore.kernel.org/all/20250906041333.642483-1-wens@kernel.org/

Changes since v2:
- DT binding
  - Added "select" to avoid matching against all dwmac entries
- driver
  - Include "ps" unit in "... must be multiple of ..." error message
  - Use FIELD_FIT to check if delay value is in range and FIELD_MAX to get
    the maximum value
  - Reword error message for delay value exceeding maximum
  - Drop MASK_TO_VAL
- Link to v2:
  https://lore.kernel.org/all/20250813145540.2577789-1-wens@kernel.org/

Changes since v1:
- Dropped RFT tag
- Switched to generic (tx|rx)-internal-delay-ps 
- dwmac-sun55i driver bits
  - Changed dev_err() + return to dev_err_probe()
  - Added check of return value from syscon regmap write
  - Changed driver name to match file name
- sram driver bits
  - Fixed check on return value
  - Expanded commit message
- dtsi
  - Fixed typo in tx-queues-config
- cubie a5e
  - Add PHY regulator delay
- Link to v1:
  https://lore.kernel.org/all/20250701165756.258356-1-wens@kernel.org/

This series adds support for the second Ethernet controller found on the
Allwinner A523 SoC family. This controller, dubbed GMAC200, is a DWMAC4
core with an integration layer around it. The integration layer is
similar to older Allwinner generations, but with an extra memory bus
gate and separate power domain.

Patch 1 adds a new compatible string combo to the existing Allwinner
EMAC binding.

Patch 2 adds a new driver for this core and integration combo.

Patch 3 adds a device node and pinmux settings for the GMAC200.

Patches 4, 5, and 6 enable the GMAC200 on three boards. I only tested
the Orangepi 4A and Radxa Cubie A5E.


Please have a look and help test on the Avaota A1. I don't expect
any issues there though, since the PHY is always on, unlike on the
Cubie A5E.

Patches 1 and 2 should go through net-next, and I will take all the
other patches through the sunxi tree. Hopefully we can get this merged
for v6.18.


Thanks
ChenYu

Chen-Yu Tsai (6):
  dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
  net: stmmac: Add support for Allwinner A523 GMAC200
  arm64: dts: allwinner: a523: Add GMAC200 ethernet controller
  arm64: dts: allwinner: a527: cubie-a5e: Enable second Ethernet port
  arm64: dts: allwinner: t527: avaota-a1: enable second Ethernet port
  arm64: dts: allwinner: t527: orangepi-4a: Enable Ethernet port

 .../net/allwinner,sun8i-a83t-emac.yaml        |  95 ++++++++++-
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi |  55 ++++++
 .../dts/allwinner/sun55i-a527-cubie-a5e.dts   |  28 ++-
 .../dts/allwinner/sun55i-t527-avaota-a1.dts   |  26 ++-
 .../dts/allwinner/sun55i-t527-orangepi-4a.dts |  23 +++
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |  12 ++
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
 .../ethernet/stmicro/stmmac/dwmac-sun55i.c    | 159 ++++++++++++++++++
 8 files changed, 393 insertions(+), 6 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sun55i.c