diff mbox series

[v2,3/5] sunxi: spl: spi: Add support for Allwinner A523

Message ID 20260515234601.15431-4-andre.przywara@arm.com (mailing list archive)
State New
Headers
Series sunxi: A523: Add SPI support |

Commit Message

Andre Przywara May 15, 2026, 11:45 p.m. UTC 
The SPI IP in the Allwinner A523 is mostly compatible to the later
generation used in other Allwinner SoCs, at least as far as the SPL
driver is concerned.

Just add the pinmux configuration for SPI0 on PortC, as used by the
BROM. This enables SPI (NOR) boot on A523/A527/T527 boards.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
 arch/arm/mach-sunxi/spl_spi_sunxi.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-sunxi/spl_spi_sunxi.c b/arch/arm/mach-sunxi/spl_spi_sunxi.c
index 5cdf155d76a..6c9937128b9 100644
--- a/arch/arm/mach-sunxi/spl_spi_sunxi.c
+++ b/arch/arm/mach-sunxi/spl_spi_sunxi.c
@@ -113,6 +113,8 @@  static void spi0_pinmux_setup(unsigned int pin_function)
 	const u16 spi0_pc_pins[4] = {
 #if IS_ENABLED(CONFIG_MACH_SUN8I_R528)
 		SUNXI_GPC(2), SUNXI_GPC(3), SUNXI_GPC(4), SUNXI_GPC(5)
+#elif IS_ENABLED(CONFIG_MACH_SUN55I_A523)
+		SUNXI_GPC(2), SUNXI_GPC(3), SUNXI_GPC(4), SUNXI_GPC(12)
 #elif IS_ENABLED(CONFIG_MACH_SUN50I_H616)
 		SUNXI_GPC(0), SUNXI_GPC(2), SUNXI_GPC(3), SUNXI_GPC(4)
 #elif IS_ENABLED(CONFIG_MACH_SUN50I_H6)
@@ -250,7 +252,8 @@  static void spi0_init(void)
 	unsigned int pin_function = SUNXI_GPC_SPI0;
 
 	if (IS_ENABLED(CONFIG_MACH_SUN50I) ||
-	    IS_ENABLED(CONFIG_SUN50I_GEN_H6))
+	    IS_ENABLED(CONFIG_SUN50I_GEN_H6) ||
+	    IS_ENABLED(CONFIG_MACH_SUN55I_A523))
 		pin_function = SUN50I_GPC_SPI0;
 	else if (IS_ENABLED(CONFIG_MACH_SUNIV) ||
 		 IS_ENABLED(CONFIG_MACH_SUN8I_R528))