[v10,1/2] dt-bindings: mfd: x-powers: Add AC200
Commit Message
The AC200 is an I2C-controlled mixed-signal companion IC containing
audio, video, RTC and Fast Ethernet PHY functions.
Describe the parent device and its shared input clock together with the
audio codec and TV encoder child nodes. Keep their analog supplies on the
function consumers and describe the TV encoder display graph and optional
bandgap calibration cell.
Add the shared interrupt-controller properties and interrupt numbers used
by the TV encoder. The Ethernet PHY is represented by a PHY package on its
MDIO bus, with a phandle back to this device for access to the package
control registers, so it does not require an MFD child node.
Keep the INTB connection and TV encoder interrupt optional, including when
the TV encoder is enabled. Cable detection status is readable over I2C
without an interrupt. If a TV encoder interrupt is described, require the
parent interrupt domain and its upstream connection. Include examples
with and without INTB connected.
The input clock must run at 24 or 27 MHz when the Ethernet PHY is used,
matching the rates encoded by its documented clock selector.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
---
.../devicetree/bindings/mfd/x-powers,ac200.yaml | 231 +++++++++++++++++++++
MAINTAINERS | 8 +
include/dt-bindings/mfd/x-powers,ac200.h | 13 ++
3 files changed, 252 insertions(+)
new file mode 100644
@@ -0,0 +1,231 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/x-powers,ac200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: X-Powers AC200 mixed-signal IC
+
+maintainers:
+ - James Hilliard <james.hilliard1@gmail.com>
+ - Jernej Skrabec <jernej.skrabec@gmail.com>
+
+description:
+ The AC200 is a mixed-signal companion IC containing audio, video, RTC and
+ Fast Ethernet PHY functions. Its control registers are accessed over I2C.
+
+properties:
+ compatible:
+ const: x-powers,ac200
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description:
+ AC200 input clock. When using the Ethernet PHY, its configured rate must
+ be 24 or 27 MHz, matching the rates encoded by the documented EPHY clock
+ selector.
+
+ interrupts:
+ maxItems: 1
+ description:
+ The shared open-drain INTB output for the TV encoder, Ethernet PHY and
+ RTC interrupts. Omit when INTB is not connected.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 1
+ description:
+ The interrupt number, as defined in
+ include/dt-bindings/mfd/x-powers,ac200.h.
+
+ codec:
+ type: object
+ $ref: /schemas/sound/dai-common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ compatible:
+ const: x-powers,ac200-codec
+
+ '#sound-dai-cells':
+ const: 0
+
+ ac-ldoin-supply:
+ description: The 3.3 V supply for the audio codec LDO input.
+
+ required:
+ - compatible
+ - '#sound-dai-cells'
+ - ac-ldoin-supply
+
+ tv-encoder:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: x-powers,ac200-tve
+
+ interrupts:
+ maxItems: 1
+ description:
+ Cable detection interrupt routed through the AC200 interrupt
+ controller. Omit when INTB is not connected. Cable detection status
+ can also be read over I2C without an interrupt.
+
+ tv-vcc-supply:
+ description: The 3.3 V supply for the composite-video DAC.
+
+ nvmem-cells:
+ maxItems: 1
+
+ nvmem-cell-names:
+ items:
+ - const: bandgap
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Input from the display pipeline, carrying CCIR656.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Output to the composite-video connector.
+
+ required:
+ - port@0
+ - port@1
+
+ required:
+ - compatible
+ - tv-vcc-supply
+ - ports
+
+ dependencies:
+ nvmem-cells: [ nvmem-cell-names ]
+ nvmem-cell-names: [ nvmem-cells ]
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - if:
+ properties:
+ tv-encoder:
+ anyOf:
+ - required: [ interrupts ]
+ - required: [ interrupts-extended ]
+ required:
+ - tv-encoder
+ then:
+ required:
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+
+dependencies:
+ interrupt-controller: [ '#interrupt-cells', interrupts ]
+ '#interrupt-cells': [ interrupt-controller ]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/x-powers,ac200.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixed-signal@10 {
+ compatible = "x-powers,ac200";
+ reg = <0x10>;
+ clocks = <&pwm 5>;
+ interrupt-parent = <&pio>;
+ interrupts = <1 20 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ codec {
+ compatible = "x-powers,ac200-codec";
+ #sound-dai-cells = <0>;
+ ac-ldoin-supply = <®_aldo2>;
+ };
+
+ tv-encoder {
+ compatible = "x-powers,ac200-tve";
+ interrupts = <AC200_IRQ_TVE>;
+ tv-vcc-supply = <®_aldo2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tve_in: endpoint {
+ remote-endpoint = <&tcon_out_tve>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tve_out: endpoint {
+ remote-endpoint = <&composite_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixed-signal@10 {
+ compatible = "x-powers,ac200";
+ reg = <0x10>;
+ clocks = <&pwm 5>;
+ /* INTB is not connected. */
+
+ tv-encoder {
+ compatible = "x-powers,ac200-tve";
+ tv-vcc-supply = <®_aldo2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&tcon_out_tve>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ endpoint {
+ remote-endpoint = <&composite_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+...
@@ -29504,6 +29504,14 @@ F: drivers/net/wwan/
F: include/linux/wwan.h
F: include/uapi/linux/wwan.h
+X-POWERS AC200 DRIVERS
+M: Jernej Skrabec <jernej.skrabec@gmail.com>
+M: James Hilliard <james.hilliard1@gmail.com>
+L: linux-sunxi@lists.linux.dev
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/x-powers,ac200.yaml
+F: include/dt-bindings/mfd/x-powers,ac200.h
+
X-POWERS AXP288 PMIC DRIVERS
M: Hans de Goede <hansg@kernel.org>
S: Maintained
new file mode 100644
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Interrupt numbers of the X-Powers AC200 interrupt controller.
+ */
+
+#ifndef _DT_BINDINGS_MFD_X_POWERS_AC200_H
+#define _DT_BINDINGS_MFD_X_POWERS_AC200_H
+
+#define AC200_IRQ_TVE 0
+#define AC200_IRQ_EPHY 1
+#define AC200_IRQ_RTC 2
+
+#endif /* _DT_BINDINGS_MFD_X_POWERS_AC200_H */